OT-64 Advice needed
Moderators: Charlesm, KarlJ, zoltan
- texas pete
- Posts: 379
- Joined: Thu Dec 09, 2010 11:20 am
- Location: Warwickshire, UK
OT-64 Advice needed
Hi All,
A friend of mine is in need of operating advice on the OT-64.
Would anyone who has/had one or knows how to operate one mind if I put him contact with you?
Many Thanks
A friend of mine is in need of operating advice on the OT-64.
Would anyone who has/had one or knows how to operate one mind if I put him contact with you?
Many Thanks
BRDM-2rkh
Looking for a Maz 543 with kung body, please pm me if you know of one for sale
Looking for a Maz 543 with kung body, please pm me if you know of one for sale
Re: OT-64 Advice needed
It's not Mr Moore is it? Sorry Richard, couldn't resist
“There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.”
Mark Twain
Mark Twain
Re: OT-64 Advice needed
There is some info from CZ , need google translate
http://www.brdm2.estranky.cz/fotoalbum/ ... opravach-/
http://forum.valka.cz/topic/view/12597/ ... OT-64-SKOT
http://www.valka.cz/11058-Stredny-Koles ... T-vz-64-I-
http://www.brdm2.estranky.cz/fotoalbum/ ... opravach-/
http://forum.valka.cz/topic/view/12597/ ... OT-64-SKOT
http://www.valka.cz/11058-Stredny-Koles ... T-vz-64-I-
- texas pete
- Posts: 379
- Joined: Thu Dec 09, 2010 11:20 am
- Location: Warwickshire, UK
Re: OT-64 Advice needed
Lol, no it's notAbrs wrote:It's not Mr Moore is it? Sorry Richard, couldn't resist
Thanks Gustav, I'll pass those links on
He seems to be having difficulty getting the vehicle into forward drive. Reverse is OK. Is the switch over pneumatic? And I'm sure the gearbox is a pre-select
BRDM-2rkh
Looking for a Maz 543 with kung body, please pm me if you know of one for sale
Looking for a Maz 543 with kung body, please pm me if you know of one for sale
Re: OT-64 Advice needed
I had one up to a few years ago ,great fun but a bit on the big size ,I gave a drivers manual to a man in Co.Donegal recently who is in the process of importing one from Poland ,I will have a look I might have another manual some where
Re: OT-64 Advice needed
Ahh if it's like the tatra, which is what I believe its based on then the gear selector has a pneumatic booster, on the 813 there is also a pre selector which alters gear ratios automatically once the clutch has been pressed, if it is the same then I do have a manual that might help. However it sounds like might have an additional feature such as a shuttle of some sort which would allow you to flick from forward to reverse without needing to actually change gear, if it has this feature it would most likely be electro-pneumatically actuated, might be something to check for as if it were faulty it could give you the problem you described.
“There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.”
Mark Twain
Mark Twain
Re: OT-64 Advice needed
if my memory serves to engage reverse ,there is a knob behind the gear lever that was lifted up and reverse was engaged ,to engage forward gear lift the knob again and it lifts out ,the forward gears are 5 sequential fairly close together ,if your mate want to PM me or call thats fine
Re: OT-64 Advice needed
Is it an Italian one?texas pete wrote:Abrs wrote:
He seems to be having difficulty getting the vehicle into forward drive. Reverse is OK.
Runners: Gaz-66
Uaz 452
110 V8 CSW on LPG
Non Runners:
110 Hardtop with no engine
Series 2A Dormobile restoration
Series 1 80" ditto
Uaz 452
110 V8 CSW on LPG
Non Runners:
110 Hardtop with no engine
Series 2A Dormobile restoration
Series 1 80" ditto
Re: OT-64 Advice needed
No no silly, it's the french ones that only have a reverse gear!
“There is something fascinating about science. One gets such wholesale returns of conjecture out of such a trifling investment of fact.”
Mark Twain
Mark Twain
Re: OT-64 Advice needed
well the Ferret has 5 forward and reverse gears
- texas pete
- Posts: 379
- Joined: Thu Dec 09, 2010 11:20 am
- Location: Warwickshire, UK
Re: OT-64 Advice needed
Does anyone have a link to OT-64 manuals they can share please? The BRDM2 site above which used host them doesn't appear to be active anymore
Or even if anyone can share any of their manuals, we'd really appreciate it please.
Or even if anyone can share any of their manuals, we'd really appreciate it please.
BRDM-2rkh
Looking for a Maz 543 with kung body, please pm me if you know of one for sale
Looking for a Maz 543 with kung body, please pm me if you know of one for sale