RussianMilitaryTrucks.com

Who's was it?

No soz, too far, too busy, Uaz is still broken

That's the meat for the Curry sorted

Shopping list?

Thought about one, can fit one in tunnel behind grill, a remote in line one before it splits into front and rear axle supply's. I did find one, but never purchased it to fit it. Just got used to stamping on the pedal!

Good Stuff, keep it going. Its always handy to have something to hand to read to send me to sleep at times :D :D B-( The ballast resistor is handy when the mechanical fuel pump needs to crank over to get a cold supply of fuel to the Carb, keeps a good voltage at coil when battery drops off. Saying t...

Nice...but don’t tell the missus I'll have to ask the admins to reject her from the forum We can soon sort that out! Hi Matt Good to know that you are fully committed to endless searching for parts and eventful journeys. I know how it feels when you have to deal with blocked fuel pipes. Once I drov...

You going to point your big barrels at us again?

Mines got no gearbox at the mo and body work is held on by screws around the side step. Johns Gaz hasnt turned a wheel for years and Chris doesnt know what he is doing next week???

We put 80/90 in Chris's gaz when he got it, few years later we dropped it and had a nice glitter flake in oil of the bronze parts in box possibly???? So we put in what id tried in my uaz, its a straight 90, and chris said it transformed his geard box!! https://www.exol-lubricants.com/products/automo...

Been a while since i dropped Chris's spare down, but im sure we took the clamps off, then take the weight and move the ratchet dog out the way and left it drop down. You can stick a socket on and wind it down, but slow.

Exol anthea 90 golden necta!!

Cool good work that man!

Just wack some straight 90w in it, mines been good as gold with that in all the boxes

portamurda1 wrote: ↑

Sun Mar 22, 2020 8:56 pm

...there’s bugger all else to do...
Except lambing and ACTUALLY working on our vehicles
So what’s going on?

I started and moved the Uaz!!!!

Might even fix it mext week, clutch release bearing gone.

There is a drain plug and a re fill plug in box some where!
Got my old one in the garage roof, many years ago i had mine out. Have a look through my old posts might fine a hint.

I think there is a big allen key needed to adjust the back lash on the outside also, with a lock washer set up of sorts.

Mines parked up again! Clutch release bearing chewing through everything. Cba to repair it currently, real life getting in the way. Lost the love of the loaf.

As Acmatman said, new pump will try and push away when fitting, you will be fighting against the spring on lever. But wiggle and push in and lever will locate on cam shaft.

I gave up and fitted a low pressure facet pump, fed up of changing rubber valves.

Lol i did have a oohhhhh poo moment when i saw you there. Your expession was ace, so much fun buzzing around arena.

Arhhh look at my little loaf plodding along!!

Does look really slow, but was manic in the cabs i tell ya!!

Sunshine, very hot and then it rained. Then the fun really started, split the men from the boys. We carried on in the arena, two of us with new paint work, driving the nuts off the trucks sideways, Yes a Gaz 66 can power slide!! https://youtu.be/cw4h9OYY59s https://youtu.be/lEBZyHZtrCU https://youtu...

Its a bit clean! Didnt see you in the mud, 4wd not working.?