RussianMilitaryTrucks.com

Jonathan and I will be there with the UAZ

Jonathan and I will me there, but not sure what with at present

Jonathan and I will me there, but not sure what with at present

Well they have come through. I now have a full set to go. planning to go down on the Saturday the 23rd

just received three of my four my referred tickets, email them about the forth.

it would be a good idea to have a back plan

I seem to think so, but the wheels changed over the years. I will have a chat with a couple of my friends.
regards
Derek

Remember to check the off set. some Suzuki rims cam foul. You can also use 16" rims the PCD is 5.5" or 139.5mm (140) the centre hole has to be around 4". I had to grind out the centre hole to get them to fit.

I am up for it. Jonathan will want to bring his K750

At the recent Wigtail meet I was asked about having spring repaired and remade. I used the firm below to remodel a set of UAZ 469 rear spring so they could be used on my GAZ67b. One of the spring ends needed to be reversed so instead of having both end going up, the GAZ 67 has one end going up and t...

two of us are bring a KMZ k750 to see how it copes with the trials

Planning to go

Sounds good mid September to end of October sound good, Just need the ok for camping over night.

thanks memory can be a funny thing it is 16 x 6.5 . The 205 80 R16 is the maximum size but the 175 80 R16 is closer which is used on the London Taxi and can be bought on ebay.

The hubs are 5.5 PCD or approx 140 mm the center hole is 4" or 102 mm. You have to be careful of the offset as the steering arm can rub on the inside of the rim. The normal tyre is 16 - 6.00 cross ply, or 205 80 R16 will fit the rims. The tyres shown are much wider so they may have fitted spacing ri...

I run AB6 spark plugs in my Gaz 67 and they work fine

1956 Gaz 69 can be positive earth so check your battery connection. later they moved to negative earths. Look in the download section there are a number of Gaz 69 manuals.

my son found this

its Potemkin PM him its just back from W&P with no trouble

could be a blocked exhaust causing back pressure had in on a 67 a few years ago